HOW TO EXPOSE A SCREEN!
- Take a screen
- Take a scoop coater and fill with emulsion.
- Put scoop coater at bottom of screen, press down and pull up.
- Make sure the emulsion is not too thick. If any excess- remove with paper squeegee.
- Leave to dry in dark closet with a fan.
- Take the films and place them on the exposure unit facing up. Dont flip the image other wise it will turn out reversed.
- Take the screen and put it flat side down over the films.
- Close the exposure unit and set it for X time.
- Take screen to wash out area, and on low flow with the power washer rinse the emulsion. The image should now appear.
- Let screen dry.
TIMES: Mylar: 70sec Clear film: 40-50sec ink jet film(grey tint): 50sec
